Kpro Wont stay connected

K-Series Programmable ECU installation questions / support issues
Post Reply
2thoj
Posts: 3
Joined: Sat Jul 05, 2014 1:07 pm

Kpro Wont stay connected

Post by 2thoj »

My K Pro V3 won't stay connected to the laptop while the car is idling. Car is a RSX Type S
It will stay connected when the car is off and turned on to the key position II but when car is idling it disconnects.
If i give it throttle pass 1k rpm it will stay connected.

I've tried adding more ground to the engine bay
different laptop
different usb cables
checked voltage on the car there fine
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro Wont stay connected

Post by Spunkster »

Are you using resistor type or non-resistor type spark plugs?
2thoj
Posts: 3
Joined: Sat Jul 05, 2014 1:07 pm

Re: Kpro Wont stay connected

Post by 2thoj »

Resistor type
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro Wont stay connected

Post by Spunkster »

What is the part number of the spark plugs? Have you done anything to the ignitions system on the car?
2thoj
Posts: 3
Joined: Sat Jul 05, 2014 1:07 pm

Re: Kpro Wont stay connected

Post by 2thoj »

izfr6k11. i have the yellow power wire on the ignition tap for power to some lights.
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro Wont stay connected

Post by Spunkster »

Pull your spark plugs and make sure they are not fouled.
Post Reply