Hondata s300 solid cel, no start.

RooneyRocket · Post by **RooneyRocket** » Wed Jun 21, 2017 1:42 pm

Hi, I have recently encountered a problem with my hondata ecu. I haven't used it for a while now and when I fitted it to my car and uploaded a new map its giving me a solid cel and not firing.

Ecu serial number:22502
I was using the current smanager
The calibration was the gsr one
Unable to get datalog
Civic ek4
P28 I think as the code has been removed from the side

Post by **Spunkster** » Wed Jun 21, 2017 1:58 pm

Have the capacitors been replaced inside the ECU?

RooneyRocket · Post by **RooneyRocket** » Wed Jun 21, 2017 2:37 pm

I haven't replaced them, but they could have been done before as everything seems in order inside the ecu case

Post by **Spunkster** » Wed Jun 21, 2017 4:52 pm

Post a picture of the inside of the ECU

RooneyRocket · Post by **RooneyRocket** » Wed Jun 21, 2017 5:46 pm

RooneyRocket · Post by **RooneyRocket** » Thu Jun 22, 2017 3:16 am

Post by **Spunkster** » Thu Jun 22, 2017 9:37 am

The capacitors all look original, so that is something to consider. I would recommend that you try the s300 in a friend's ECU that has s300 to see if it works in their ECU.

Hondata

Hondata s300 solid cel, no start.

Hondata s300 solid cel, no start.

Re: Hondata s300 solid cel, no start.

Re: Hondata s300 solid cel, no start.

Re: Hondata s300 solid cel, no start.

Re: Hondata s300 solid cel, no start.

Re: Hondata s300 solid cel, no start.

Re: Hondata s300 solid cel, no start.