OBD2 Wiring

[polok]

Hi,
Does have anybody the wiring pinout from ECU to OBD2. I have a Kpro ECU and a K20a2 without CAN. After swap in a Elise I have only connected pin 4 ground,5 ground,7k-line and 16 battery of OBD2 plug. Unfortunately in this case I got no connection with ECU in Torque Lite.

[Hondata]

That wiring is correct. Double check you have the pin numbering correct, then try a different scan tool.

[polok]

Thanks
Shall I cut the remaining OBD wiring from Lotus ECU like PIN 65,79 etc.
Or it doesn't matter and I could save work

[Hondata]

Is the Lotus ECU still connected?