B18B Turbo basemap

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Maters
Posts: 3
Joined: Sat Dec 03, 2016 9:17 pm

B18B Turbo basemap

Post by Maters »

Hi, I'm just chasing a basemap for my B18b turbo setup.

Stock long motor

Turbo is a wrx td04

Injectors
Coil Resistance: 12.5 Ohms
Static Flow Rate: 550 cc/min @ 43.5PSI ( 300kPa )
Gain: 0.12ms/MG
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 300KPa
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Variance:3%

Will be running wastegate pressure of 8psi

Stock map sensor for the minute.

Any other info needed just ask ☺️
drisdellecalgary
Posts: 1
Joined: Wed Jun 14, 2017 8:04 pm

Re: B18B Turbo basemap

Post by drisdellecalgary »

hey im new to this and cant find anyone around me to help i just need a basemap for b18b turbo with 550cc injectors
Monnoracing
Posts: 110
Joined: Sun Aug 28, 2011 11:41 pm

Re: B18B Turbo basemap

Post by Monnoracing »

This setup is using BBG but the injectors are Bosch 560cc and on E85 fuel.
You do not have the required permissions to view the files attached to this post.
Post Reply