LSV NEED TUNE

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
VBUILD
Posts: 3
Joined: Thu Feb 16, 2017 12:52 am

LSV NEED TUNE

Post by VBUILD »

Looking for a tune
Have a LSV set up
Stock internals
B18c1(94) head
B18B1 block
B16 tb
Aem camgears
Stock injectors
BLOX intake manifold
Cold air intake
Stage 2 clutch
Previously was doing 180 on e85 trying to run it on 93 pump gas for now
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: LSV NEED TUNE

Post by Zperformance »

I would advice to have wideband and adjust afr to spec. Let me know how it do and if you have any problem.
You do not have the required permissions to view the files attached to this post.
ajmatthews88
Posts: 2
Joined: Mon Jun 12, 2017 5:16 pm

Re: LSV NEED TUNE

Post by ajmatthews88 »

Zperformance wrote: Wed Mar 15, 2017 6:20 pm I would advice to have wideband and adjust afr to spec. Let me know how it do and if you have any problem.
I put this tune on my b18c1 just wondering what you mean by adjust wideband and afr to spec , Or how to go about doing that . I have a similar set up as stated above except I have a 65mm tb .
Post Reply