afr going to lean on boost

[tweenpix]

at some length AFR ~ 10-11 the indicator shows LEAN.





it's probleme of calibration or fuel pump or wideband?

thanks

f22turbo111-v9.skl

f22turbo111-v9-160921-071703.s3d

SOLVED:
probleme in bad fuel pump

[Hondata]

It is a rev limiter at the point in the datalog about (11:10) Disable launch control and the speed limiter see if that helps.

[tweenpix]

ok, i try it

[tweenpix]

same probleme
if you can, please look log file
need replace fuel pump?

f22turbo111-v11.skl

f22turbo111-v11-short-log.s3d

[Hondata]

Only problem I see is at 2:35 which is a boost cut.

[tweenpix]

Only problem I see is at 2:35 which is a boost cut.

thank you very much
but boost cut on settings = 1600 mbar
on 2:35 maximum boost is 1592 mbar

[Hondata]

The datalog shows the MAP at a far lower sample rate than what the ECU sees. The datalogged MAP was 99.5% of the boost cut pressure, but there was one or more values at 1600 or higher pressure.

[tweenpix]

thank you very much
i find my probleme
the fuel pump is bad - flow is 90 lph on 43 psi

need replace
thanks again