base map help please

eRACING · Post by **eRACING** » Tue Jun 21, 2005 6:53 pm

My brother has a stock internally JDM B16, S200B, RC 440 Injectors, running a Rev Hard T3/T04E turbo at 7.25 psi. Until he welds up a wideband bung I cannot tune for A/F and fuel.

My question is, until he puts in a bung, what base pre programmed map should I run.. Currently I burnt him the "b16afmaxturbo9lbs-440-60-4500-B16A Fmax Turbo 9 lbs" map off the custom tables provided in Rom Editor... This map obviously has him running extremely rich in fuel causing the car to bog quite a bit.

Maybe this is for the Hondata people direct, but is there a better map I could use for his @ 8psi setup on 440 injectors??? Please let me know.. Thanks

eRACING · Post by **eRACING** » Tue Jun 21, 2005 8:32 pm

anyone?

Post by **Spunkster** » Wed Jun 22, 2005 9:23 am

I would recommend just using a stock basemap adjusted for injector size and custom boost tables created under EDIT, CREATE BOOST TABLES.

eRACING · Post by **eRACING** » Wed Jun 22, 2005 2:41 pm

can anyone tell me how much boost the "b16 440inj Greddy Turbo" map is based on located in the custom tables??

Post by **Spunkster** » Wed Jun 22, 2005 4:56 pm

I do not recommend using the custom tunes, as they are old and very out of date. You could just start form a new map and create your own boost maps. This will require less adjusting and fixing when you begin tuning.