Race Dash

[keithc]

Hi all,

I have a race car with a DC5 Integra Engine and ECU.
I want to fit a proper race dash so I can get rid of all the guages and datalog etc.
Problem is none of the Dash manufacturers support the Jap spec ECU "PRC"
Question is could I just get a "PRB" ecu from a EP3 Civic (they all seem to support this model ecu) and load my current map onto it!?
I know the fuel pump is wired slightly different but that is easy changed, I'm not currently running a Lambda.

Cheers

Keith

[Spunkster]

The ECU has nothing to do with it, as long as you have a version 4 K-Pro.

Details on supported dashes can be found below:
http://www.hondata.com/help/kmanager/mo ... htsub=dash
http://www.hondata.com/help/kmanager/ai ... htsub=dash
http://www.hondata.com/help/kmanager/ra ... htsub=dash
http://www.hondata.com/help/kmanager/di ... ub=digital

[keithc]

Ah ok thanks,
with version 3 it matters tho!!

Cool ill prob just upgrade to version 4 K-Pro
Will I have to get the K-Pro 4 remapped or can I load my original map onto it.
Don't know if maps are intechangable from different versions K-Pro

[Spunkster]

You can use your existing calibration with the new K-Pro.

[keithc]

Excellent

Thanks for your Help

Keith

[keithc]

Will the AIM/Hondata adaptor module work with the "PRC" ecu!?
Would be alot cheaper option than upgrading to Kpro4
I have v3

[Spunkster]

You could use that, but the details are no longer n the help file.

[keithc]

I have found old threads showing what settings etc.
And aim have the wiring diagram.
Main thing is it will work with the JAP PRC ecu

[Spunkster]

It is dependent on the calibration used I believe, not the actual ECU.

[keithc]

Ah ok, I'll check that altho I think the calibration used us prc

[Spunkster]

There are no PRC calibrations, only PRB, PNF, and PND.

[keithc]

Oh right ok. I'll check tomorrow
Thanks

[keithc]

Might be a stupid question but how do I check what calibration is on my ecu!?

[keithc]

It's ok I found it.
Found it in the notes.
It's a PRB calibration type