Compound Turbo S2000 Monitoring

[SanfordBuilt]

I am building a Compound Turbo S2000. I currently have Hondata KPro2. I will need to monitor many things and possibly more in the future. Right now it will be:

LP turbo boost
HP turbo boost
EGT
Oil Pressure
AFR

Future:
Shaft speed on both turbos
Backpressure sensor

My question is, I don't want a ton of gauges all over the already small cabin. I was hoping to be able to run the sensors to KPro and display them on my laptop and then possibly a tablet to have the there and viewable all the time mounted in the dash.

Will I need Kpro4 to do this? What are the most cost effective ways of going about this?

[Hondata]

Lambda - KPro4 analog or digital input
EGT - KPro4 analog input
Pressure x 4 - KPro4 analog input
Turbine speed x 2 - you'll need the device which converts to an analog output (usually the gauge does this).

[SanfordBuilt]

What about the monitoring it all on a tablet (thinking a Nexus 7) How is that done?

Sorry if that's a super easy question, just trying to clarify everything before I jump into it all.

[Hondata]

The tablets apps don't show analog or digital inputs; only the ECU sensors.

[SanfordBuilt]

So there's no way to display all of those inputs on a screen somewhere?

[Spunkster]

Only in Kmanager, and that will only run under Windows.

[SanfordBuilt]

What about something like the GaugeART product I've seen around?

[Hondata]

You would have to ask them.

[fonzeka]

There are small and cheap tablets that can run Windows.
I'm thinking about buying a 7" one myself for monitoring, logging and doing small adjustments.
The kmanager interface is not the cleanest looking but it can be setup to show everything that you want.