KPRO V4 IQ3 Output

K-Series Programmable ECU installation questions / support issues
Post Reply
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO V4 IQ3 Output

Post by Spunkster »

Yes you can try it but I would not run it that way.
Top
tehlonz
Posts: 18
Joined: Fri Mar 06, 2015 12:49 pm

Re: KPRO V4 IQ3 Output

Post by tehlonz »

Spunkster wrote:Yes you can try it but I would not run it that way.
So , I configured my ZT-3 to match the wideband output of the PLX SM-AFR .
0v - 0.68lambda , 5v - 1.36 lambda .
RACEPAK.png

Changed my kal to reflect SM-AFR preconfiguration to AN0 . Uploaded config to KPRO .

At Ign on , dash will display a static 14.7. However when running , dash displays a live stream of wbo2 data , matching that of my hondata display page and zeitronixs SW .

Thank you for your help Spunkster / Hondata support.

I have attached the most current datalog if it is of use for further development.
TRIAL.kal
RACEPAK_WORKING.kdl
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “K-Pro / KManager”