Idle control on cl7 euro r cable throttle

K-Series Programmable ECU installation questions / support issues
Post Reply
chukhchukh
Posts: 17
Joined: Sat Oct 10, 2015 11:12 am

Idle control on cl7 euro r cable throttle

Post by chukhchukh »

Could i tune the idle control through my kpro? Because i found the idle was very unstable and holding on high rpm when idle after i modify the big bore throttle s90racing. Thank a lots
User avatar
Hondata
Site Admin
Posts: 10615
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Idle control on cl7 euro r cable throttle

Post by Hondata »

Block off the idle port. If the rpm does not fall to < 500 rpm, your throttle body has air leaks, and the idle valve will not be able to reduce the idle speed.
Hondata
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Idle control on cl7 euro r cable throttle

Post by Spunkster »

How are you using a K-Pro on that vehicle?
chukhchukh
Posts: 17
Joined: Sat Oct 10, 2015 11:12 am

Re: Idle control on cl7 euro r cable throttle

Post by chukhchukh »

Hondata wrote:Block off the idle port. If the rpm does not fall to < 500 rpm, your throttle body has air leaks, and the idle valve will not be able to reduce the idle speed.
Thank you for your recommendation.i had tried to block off the idle air port and found the rpm will drop nearly turn down the engine. But i feel a strong suction from the idle air port seem to push the rpm so high.but when i waiting for few second, sometimes this idle valve will reduce slowly in order to slow down the rpm. whats wrong with this? When i driving , my feet leave the throttle pedal ,the rpm will still keep seem i never leave the pedal. Thank you
Post Reply