Upgrade MAP sensor from Stock to Hondata 4bar

[typer86]

Hi Hondata,

I received the new Hondata 4-Bar MAP sensor for the FN2 because my S/C kit makes more then 10.5 PSI of boost.
So the stock MAP sensor is on the limit...

Question:
> After install the new 4-bar MAP sensor and select the 4-Bar Hondata sesnor in the FlashPro Calibration - any other modification in the cal is required?
(Modify fueling etc.)

Thanks

[Spunkster]

No other changes should be needed.

[typer86]

Great, Thanks :)