Ignition timing not matching tables

K-Series Programmable ECU installation questions / support issues
Post Reply
h2.4
Posts: 22
Joined: Fri May 29, 2009 2:06 pm

Ignition timing not matching tables

Post by h2.4 »

At idle I'm having 5-8* of timing when the tables are 18.5. I've looked through the ignition compensators. Only thing I have found was Accel smoothing that is showing 31.75* or retard with a/c off. Is this normal to have timing pulled at idle?
Honda
Posts: 30
Joined: Sat May 17, 2014 9:59 am

Re: Ignition timing not matching tables

Post by Honda »

Look at idle Tab
Idle ignition compensation retard.
and
Idle Ignition Control - Range (Max advance)
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing not matching tables

Post by Spunkster »

This is normal as the K-Series has ignition controlled idle.
h2.4
Posts: 22
Joined: Fri May 29, 2009 2:06 pm

Re: Ignition timing not matching tables

Post by h2.4 »

Ok, thanks I zeroed the retard out last time I remember. I will look into those, or just leave it, upon you stating that it is normal.
Post Reply