Please help me!

Ant06ka · Post by **Ant06ka** » Thu Aug 20, 2015 12:33 am

Hi guys!
Help me to understand.
Hondata Kpro and kpro D17 there are any differences in the chip?
Or for the D17 only have to buy сamgear?

Post by **Hondata** » Thu Aug 20, 2015 8:12 am

The KPro and ECU are the same for the D17 and RSX.

Ant06ka · Post by **Ant06ka** » Thu Aug 20, 2015 8:50 am

Hondata wrote:The KPro and ECU are the same for the D17 and RSX.

Need only Cam gear for D17? Without it will not work?

Post by **Spunkster** » Thu Aug 20, 2015 9:17 am

The Hondata cam gear is required for it to work.

Ant06ka · Post by **Ant06ka** » Thu Aug 20, 2015 10:13 am

Spunkster wrote:The Hondata cam gear is required for it to work.

No matter which manufacturer cam gear?

Post by **Spunkster** » Thu Aug 20, 2015 10:28 am

Only our cam gear will work as it is custom made and not like all other cam gears.

Ant06ka · Post by **Ant06ka** » Fri Aug 21, 2015 6:07 am

Spunkster wrote:Only our cam gear will work as it is custom made and not like all other cam gears.

What is the difference of your cam gear? You can see her photo?

Post by **Spunkster** » Fri Aug 21, 2015 9:38 am

https://www.hondata.com/images/kpro_d17/kpro_d17_l.jpg

The trigger points are in different locations than all other cam gears.

Ant06ka · Post by **Ant06ka** » Fri Aug 21, 2015 11:15 pm

Spunkster wrote:https://www.hondata.com/images/kpro_d17/kpro_d17_l.jpg

The trigger points are in different locations than all other cam gears.

I have a vision, and there is exactly the same as in your picture

Post by **Hondata** » Sat Aug 22, 2015 2:00 pm

The cam gears as pictured above will not work. The CYL timing tooth is not correct.

Ant06ka · Post by **Ant06ka** » Sun Aug 23, 2015 6:03 am

Hondata wrote:The cam gears as pictured above will not work. The CYL timing tooth is not correct.

I see. Thanks)

Hondata