please help with idle problem

s300 and SManager software questions & answers
Post Reply
creedy
Posts: 5
Joined: Tue Aug 11, 2015 11:29 am

please help with idle problem

Post by creedy »

my car has started to not idle on start up, it will start and run at 2000rpm then drop slowly then just stall.
its on itb's and has been sat for 3 months doing nothing
You do not have the required permissions to view the files attached to this post.
AREA876
Posts: 420
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: please help with idle problem

Post by AREA876 »

Which version of S300 do you have (V1, V2, V3)
creedy
Posts: 5
Joined: Tue Aug 11, 2015 11:29 am

Re: please help with idle problem

Post by creedy »

v3
AREA876
Posts: 420
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: please help with idle problem

Post by AREA876 »

I would start by checking the map sensor because from the datalog I'm not see the map sensor reading change
creedy
Posts: 5
Joined: Tue Aug 11, 2015 11:29 am

Re: please help with idle problem

Post by creedy »

Map sensor not connected it doesn't use it. I'm running itb's without a vacuum chamber
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: please help with idle problem

Post by Spunkster »

You must have the MAP sensor connected.
creedy
Posts: 5
Joined: Tue Aug 11, 2015 11:29 am

Re: please help with idle problem

Post by creedy »

It hasn't had one connected for over a year and worked fine

I'm guessing it's how it was mapped (I know nothing about mapping)
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: please help with idle problem

Post by Spunkster »

You should probably take it back to the tuner to have them take a look.
Post Reply