S300 will not datalog correctly.

[so_vayne]

I have an s300 v3 and I can get it to datalog with the laptop but when it records based of parameters the sensors are all haywire. What could be the possible causes for this?

[Hondata]

Download and install the latest software version (currently 2.4.4) and then re-upload to your ECU.

[so_vayne]

I did, and similar results.

[Hondata]

Let me be more specific.
- Download and install the latest software version (currently 2.4.4)
- Re-upload to your ECU.
- Delete all datalogs on the s300

[so_vayne]

That is exactly what I did.

[so_vayne]

Same Issue still.

[AREA876]

Are you datalogging with PC and recording with ECU at the same time?

[so_vayne]

No, if I datalog with the ECM based on parameter set within the ecm is when I have the issue.

[Spunkster]

Has J12 been cut on the ECU?

[so_vayne]

Yes, this ECU and Hondata came from KS Tuned. I have verified it is installed correctly.

[Spunkster]

What is the serial number on the s300 board inside the ECU?

Can you post a picture of the ECU as well?

[so_vayne]

I'm currently away from home but I will be home Thursday evening and will post both then. Thank you.

[so_vayne]

Done, And done.

[Spunkster]

Has this s300 ever worked in this ECU?

[so_vayne]

It has datalogged correctly. It runs correctly. No issues.. Just will not datalog correctly.