SManager 2.4.4

[Hondata]

V2.4.0 (16 June 2015)

• USB drivers updated to v1.0.3 (Microsoft Hardware Certified)
• [S300 V3] Firmware version 5
• [S300 V3] Added digital input ethanol content and fuel temperature to datalogging.
• [S300 V3] Increased number of advanced protection inputs from 2 to 4
• Added minimum speed to full throttle shift.
• Fixed digital input unit changing when datalogging.
• Added injector voltage compensation (dead time) quick select.

V2.4.1 (16 June 2015)

• [S300 V3] Firmware version 5
• [S300 V3] Added digital input ethanol content and fuel temperature to datalogging.

V2.4.2 (25 June 2015)

• [s300 V2/s300 V3] Added analog input temperature sensor conversion.

V2.4.3 (15 July 2015)

• Changed protection limit minimum rpm from 2000 to 2500 rpm.
• Changed ECT compensation datalogging to read warm up compensation when cold

V2.4.4 (20 July 2015)

• Added closed loop minimum coolant temperature tables.
• Fixed ECT open loop fuel compensation under certain conditions

The USB driver has been certified by Microsoft so will install on Windows 7 and above without needing confirmation. It also is available in Windows Update.

Download here

[jdelcorte]

hello, how do you set up the flex fuel to datalog the percentage and fuel temp? do you use Analog Zero still on the V3?

[Hondata]

Oops, I didn't enable the sensor for ethanol content & fuel temp. I'll make another release shortly.