Flex fuel sensor and Kpro4

K-Series Programmable ECU installation questions / support issues
Post Reply
Twisted-X
Posts: 6
Joined: Sun May 16, 2010 4:55 pm
Contact:

Flex fuel sensor and Kpro4

Post by Twisted-X »

So just out of curiosity (and future plans) which flex fuel sensors do Hondata recommend for Kpro4? Also, will the stock wideband O2 in a '05 Civic SI (EP3) work well enough or should I be looking at something a bit better (AEM, Etc.)?
Thanks
Twisted-X
Posts: 6
Joined: Sun May 16, 2010 4:55 pm
Contact:

Re: Flex fuel sensor and Kpro4

Post by Twisted-X »

Nevermind, I found the info farther down. "Suitable sensors are GM part numbers 13577394, 13577379, and 13577429."
How about the O2 sensor?
User avatar
Spunkster
Site Admin
Posts: 23885
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Flex fuel sensor and Kpro4

Post by Spunkster »

The stock wideband should be pretty good. If you want to go aftermarket, we recommend the PLX Devices widebands.
Twisted-X
Posts: 6
Joined: Sun May 16, 2010 4:55 pm
Contact:

Re: Flex fuel sensor and Kpro4

Post by Twisted-X »

Is it possible to use the flex fuel sensor on the supply line of a returnless system with Kpro4?
VitViper
Posts: 273
Joined: Thu Aug 27, 2009 10:38 pm

Re: Flex fuel sensor and Kpro4

Post by VitViper »

Twisted-X wrote:Is it possible to use the flex fuel sensor on the supply line of a returnless system with Kpro4?
Yes, very easy. THis is how we do it on other platforms.
kmvguy83
Posts: 15
Joined: Wed Dec 10, 2014 5:44 pm

Re: Flex fuel sensor and Kpro4

Post by kmvguy83 »

Great timing that this thread came up. :)
So GM 13577429 can go in between the fuel filter and fuel rail, correct?
User avatar
Spunkster
Site Admin
Posts: 23885
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Flex fuel sensor and Kpro4

Post by Spunkster »

correct
Post Reply