Is this normal AFR for cold start?

s300 and SManager software questions & answers
Post Reply
munro88
Posts: 3
Joined: Fri Oct 24, 2014 2:45 am

Is this normal AFR for cold start?

Post by munro88 »

Are these AFRs normal for a cold start?

Stock ITR base map for a STOCK ITR (aussie 11:1 CR) with I/H/E

Image

not sure why columns 7 and over have light up when i didnt take the car over 1600rpm, in my drive way (touched the throttle slightly)....

originally pulled codes 13 and 16 - so disabled fuel injector error and barometric pressure sensor. codes gone, will this effect the car's driveability ?

I am not using a wideband until the dyno so it is reading off stock o2 sensor.
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Is this normal AFR for cold start?

Post by Spunkster »

Ignore those readings since you do not have a wideband, they are not going to give you any real data.

If your ECU does not have the circuitry for those things then you must disable the errors.
munro88
Posts: 3
Joined: Fri Oct 24, 2014 2:45 am

Re: Is this normal AFR for cold start?

Post by munro88 »

Thanks for reply. Is it safe to drive to see that no more codes come up?
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Is this normal AFR for cold start?

Post by Spunkster »

That I could not tell you since there is no way to see the actual AF ratio.
Post Reply