Electronic boost controller to P75 OBD0-1 converted.

PR8urvtec · Post by **PR8urvtec** » Sat Oct 18, 2014 3:27 pm

I'm using Hondata S300 on a 1990 Integra. It's converted to OBD1 with a RyWire conversion harness. I'm trying to install the MAC solenoid but having trouble with the wiring.

The wiring instructions call for the MAC solenoid to be wired to pin A11. I don't have a wire on the jumper harness at pin A11 and can't seem to find a corresponding wire on the OBD0 plugs. Do I need to add a pin at A11 for it to work or is there another pin I could use?

Post by **Spunkster** » Mon Oct 20, 2014 9:26 am

If there is no pin, you will have to add one.

PR8urvtec · Post by **PR8urvtec** » Thu Oct 23, 2014 5:10 am

Cool. Thanks for the response. Boost is going up this weekend!!!

Hondata

Electronic boost controller to P75 OBD0-1 converted.

Electronic boost controller to P75 OBD0-1 converted.

Re: Electronic boost controller to P75 OBD0-1 converted.

Re: Electronic boost controller to P75 OBD0-1 converted.