Help, failure ECU pin B2. I have no signal.

[roma]

I need your support. I'm from Mexico and I have a 08 Civic SI turbo. I had problems with my boost control solenoid, it was damaged and then replaced. The deal is I'm not getting signal from the ECU (pin B2). Any suggestions? is a good idea to send the ECU to be repaired with Hondata?

Thank you very much for your help.

-Roma.

[Spunkster]

If the output on the ECU has been damaged then you will need to return your ECU to stock and unlock the FlashPro and get a new ECU and then lock the FlashPro to the new ECU. We cannot repair damaged ECUs.

[roma]

If the output on the ECU has been damaged then you will need to return your ECU to stock and unlock the FlashPro and get a new ECU and then lock the FlashPro to the new ECU. We cannot repair damaged ECUs.

Ok. Bad news :( so, when I get a new ECU I'll need new keys too?

[Spunkster]

The HOnda dealer will also have to match your keys and immobilizer to the new ECU. They should know what to do.

[roma]

Ok thank you very much for your support (Y). One more thing, you know who could sell an ECU in good condition?

[roma]

If I install a new ECU, the millage that was deleted? Because I had very little (19,000 mi). Thank you very much, I really appreciate your support.

-Roma.

[Spunkster]

The ECU has nothing to do with the odometer reading.