I have a B16A-1 in my 89 CRX with various Skunk2 add on; now I have a P30 ECU w/ S300 program. The engine will turn but will not crank-up. The relay switch was replaced and still will not start. The shop explained that the relay switch is being tripped. Just received a replacement ECU/S300
from the vendor -Trackmasters- and still the problem continues. Can anyone please HELP!
Thanks,
James
S300 B16A-1 PROBLEM
Re: S300 B16A-1 PROBLEM
It does not sound like a problem with the ECU or s300. It sounds more like a mechanical or wiring related issue. Did it ever work with this setup?
Re: S300 B16A-1 PROBLEM
Thanks for your response. Yes, I actually had the my CRX back several weeks ago and for a
couple of days it ran just fine. Then, leaving work the engine would not crank-up, ...it would
turn but not start. After numerous attempts and pushing the car a short distance, it started
right up. I drove right back to the shop and that was the last time it would start. Thanks
couple of days it ran just fine. Then, leaving work the engine would not crank-up, ...it would
turn but not start. After numerous attempts and pushing the car a short distance, it started
right up. I drove right back to the shop and that was the last time it would start. Thanks