Boost control help

[htownhatch]

I dont think my boost control is working properly. I have tried to use the output test window and i do not hear my solenoid click at all. Im new to smanager and reading the data logs, can someone tell me how much boost im getting?

Thanks in advance

[AREA876]

Using the output test window and varying the duty cycle and variable frequency you should both hear and feel the solenoid vibrating

[AREA876]

Which ECU are you using and does it have boost components installed

[htownhatch]

P28 and it does have all the boost components installed, ecu was socketed by hondata. I'll have to check my wiring.

[htownhatch]

ok so i found the issue with the wiring and have the solenoid firing with the "test outputs" window. Looking at my boost setup it looks like its set to 1% which would be the least amount of boost? is there anyway i can see what amount of boost i was hitting running off the wastegate and what percentage would it be on the boost control.

Thanks

[Spunkster]

http://www.hondata.com/help/smanager/bo ... tsub=boost

see section: Pressure vs Duty Cycle