c8 capacitor damaged

[wil60]

Hello, I use a s300 for almost 1 year without problem. but yesterday being the relenti the ecm s is extinguished. after having opened the ecu c8 condensaeur is toast. what it may come?

[Hondata]

What version & serial number is your s300? Can you post a photo of the damage?

[wil60]

it is a v2. I will take the photo and serial number today

[wil60]

my serial number is 24117. following photo.
when I unplugged the s300 engine is operating normally.

[Hondata]

Where are you located and where did you buy the s300?
Does the s300 get hot?

[wil60]

currently it is nothing, not even warm. I am from France, I purchased my s300 ais in xenocron

[wil60]

no answer? too bad for me

[Hondata]

Xenocron sold to you directly?

Email support@hondata.com for a RMA.

[wil60]

07/10/2013 yes directly. I'd like to know anyway what could caa caused destruction. I would not want to destroy a second

[Hondata]

I have not seen this before on a S300. On other ECUs usually a floating ground plane which causes reverse polarity for the components are the cause of damage.

[wil60]

what is surprising is that after c control all seems ok, the ecu works without Hondata. might this come from analog input?

[Hondata]

Normally once the ground floats then it grounds through the USB cable. I'm not sure if this is what has happened in your case.

[wil60]

thank you I will look at that