Vtec no working

K-Series Programmable ECU installation questions / support issues
Post Reply
kwolf15
Posts: 5
Joined: Mon Nov 18, 2013 11:10 pm

Vtec no working

Post by kwolf15 »

Car is a 1998 acura el. Vtec was working properly for three days then suddenly stopped working. No codes switched vtec solenoid and still nothing. Below is the map and a datalog. engine is a k20a2
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Hondata
Site Admin
Posts: 10616
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:
Contact Hondata

Re: Vtec no working

Post by Hondata »

The datalog shows VTEC spool operating. It could be the ECU or wiring.
Hondata
Top
kwolf15
Posts: 5
Joined: Mon Nov 18, 2013 11:10 pm

Re: Vtec no working

Post by kwolf15 »

tried the ecu in a stock rsx and vtec worked perfectly. any ideas as to what to look at in terms of wiring?
Top
User avatar
Hondata
Site Admin
Posts: 10616
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:
Contact Hondata

Re: Vtec no working

Post by Hondata »

Follow the manual.
Hondata
Top
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Vtec no working

Post by Spunkster »

Have you checked the oil level?
Top
kwolf15
Posts: 5
Joined: Mon Nov 18, 2013 11:10 pm

Re: Vtec no working

Post by kwolf15 »

Yes triple checked and even changed the oil. Had another shop look over the wiring everything looks good. This is extremely frustrating still not working.
Top
Post Reply

Return to “K-Pro / KManager”