AFR issue D10 ELD

[forryk]

Hey guys!

Have a AFR issue with my s300. I have the AEM uego connected to D10 and resistor cut in the ECU. Still the s300 wont read lower then 12.1 but the gauge shows 10-11. Any ideas how to fix this?

[Spunkster]

HAve you checked the voltage on the output from the AEM using a multimeter?

[retroid]

you removed both resistors, or just one?
where do you connected the wideband +V and ground?
how long are the wires?

(lower than 12.1 is arround 1.20V)