Cammed K20 Kal

K-Series Programmable ECU Calibration updates / downloads
Post Reply
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Cammed K20 Kal

Post by tkane4389 »

I have an 04 type s with kelford 179b cams, supertech valvetrain, skunk2 im, hondata img, aem cai, DCRH with full 2.5" piping to apexi ehxaust. I'm looking for a kal to get me by til I can make it to the dyno! Thanks guys
Top
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Cammed K20 Kal

Post by tkane4389 »

No one? I know there has to be a similar setup somewhere!
Top
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Cammed K20 Kal

Post by tkane4389 »

I created my own kal. I have my own tuning business, was just looking for one to save me the trouble of jacking with timing and fuel as id never tuned any kelford products before. They have a very stock like idle but slightly more aggressive.
Top
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Cammed K20 Kal

Post by tkane4389 »

Yes full advance is possible. As long as piston to valve clearances are measured prior to tuning you will know the amount of advance that is available. Check out my business page on facebook if you ever have any quesitons, search tktuned!
Top
Post Reply

Return to “K-Pro Calibrations”