Hello, i bought a few month ago a car with kpro v3. first the launch control didn't work and now, if i upload an calibration it's too rich. Afr abott 9,5..
I tried to clear the ecu, but it's still the same. :-(
What can it be?
regards
Roman
faulty Kpro3?
Re: faulty Kpro3?
ok
- what vehicle you have
euro ep3 with k24 build
- serial number of your K-Pro
10228
- ECU part number (starts with 37820) and serial number (the number under the part number)
7820-PRA-E02
- KManager version (not 'the latest')
3.30, 3.25
- the calibration (as an attachment)
ok
- a datalog of a problem (as an attachment)
not possible
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
k25 12,5 comp, k20a2 head, e85, 830cc deka
- when and where you got the K-Pro
was in the car
- a specific description of the problem
first the launch control didn't work and now, if i upload an calibration it's too rich. Afr abott 9,5..
- what vehicle you have
euro ep3 with k24 build
- serial number of your K-Pro
10228
- ECU part number (starts with 37820) and serial number (the number under the part number)
7820-PRA-E02
- KManager version (not 'the latest')
3.30, 3.25
- the calibration (as an attachment)
ok
- a datalog of a problem (as an attachment)
not possible
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
k25 12,5 comp, k20a2 head, e85, 830cc deka
- when and where you got the K-Pro
was in the car
- a specific description of the problem
first the launch control didn't work and now, if i upload an calibration it's too rich. Afr abott 9,5..