Flashpro + ID1000 = warm start issue

[dermeister]

Hi

Currently running flashpro with ID1000 Injectors. using ID1000 FlashPro basemap, we went to dyno and got it tuned. Car idles and runs great. cold starts are perfect.

the problem i have is with warm/hot starts. when starting the car after 15 min after it has been used it takes several cranks to start.

ive been searching the forums etc.. and for what i understamd the problem lies with ID dead times numbers. I even seen people saying to put less than 1000cc on the flashpro for injector size.

please help with the correctikns you guys should be made.

regards

[VitViper]

It's not a dead time issue, it's a warm start cranking tuning issue.

[dermeister]

Hi,

Could you please point me to the right direction on where is this setting?

Thanks!

[Spunkster]

There are tables you can adjust under the fuel section in the calibration window: air temerature compensation and coolant temperature compensation.

[dermeister]

Hi,

Tried fixing this but no luck... im posting a datalog from a warm startup, (172 ECT/138 IAT) it cranks for almost 10 seconds.

What setting would you guys change? I have the settings from the Hondata ID1000 calibration map...