Solid Red Light Problem

[jason marteja]

It seems like I do have the map relocator installed (called my mechanic)

[Spunkster]

Can you take a picture of your MAP sensor installed and post it here. This way we can verify it is properly reading boost.

[jason marteja]

I certainly can.

Many thanks!

[jason marteja]

Here you go. Nothing is connected to it. Unlike the first picture I found in the site. Second (larger) pic is mine.

[Spunkster]

First of all your map sensor is not even plugged in. That is a problem. Also you do not have a map sensor relocator installed so that it can read boost from the supercharger.

Please see http://www.hondata.com/tech_jrscinstall.html for more details.

[jason marteja]

Thanks for your help. Appreciate it.

One last question: why does the car start if I use the stock ecu

[Spunkster]

It may start, but will not be driveable without the map sensor connected and the relocator installed, especially with larger than stock injectors.

[jason marteja]

it turns out my car is using 3 bar for map sensor. Car starts now. However, the car is running too lean at idle and at low speed. I didn't really drive it for too long as I was afraid I might damage the motor. How do I make it richer?

[Spunkster]

You need to add fuel to the areas of the map it is running lean. If you are unsure of how to do this, I highly recommend that you take this to a tuner to tune properly or you may damage your engine.

[jason marteja]

Alright. Thanks again!