ID 2000cc problem.

K-Series Programmable ECU installation questions / support issues
Post Reply
leetec
Posts: 14
Joined: Wed May 05, 2010 3:39 pm

ID 2000cc problem.

Post by leetec »

I have bought a set of ID 2000cc injectors for my boosted k 2.2. The problem I'm having is trying to get the fueling down as the its running very rich on idle. The injector duty is 1%, does not matter what figure I put in the fuel table I can't get it to lean off.

any help with be much appreciated.
you can turbo a VTEC........but you cant VTEC a turbo :D
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: ID 2000cc problem.

Post by Spunkster »

Have you set the dead times correctly?
leetec
Posts: 14
Joined: Wed May 05, 2010 3:39 pm

Re: ID 2000cc problem.

Post by leetec »

it was the dead times that where provided with the injectors from ID.
you can turbo a VTEC........but you cant VTEC a turbo :D
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: ID 2000cc problem.

Post by Spunkster »

That may be the problem, the dead times supplied by them in the past have been incorrect.

You may want to read more about this at http://www.hondata.com/forum/viewtopic. ... dead+times
leetec
Posts: 14
Joined: Wed May 05, 2010 3:39 pm

Re: ID 2000cc problem.

Post by leetec »

ok great thank you i'll give it a try
you can turbo a VTEC........but you cant VTEC a turbo :D
Post Reply