AFR leaning out

s300 and SManager software questions & answers
Post Reply
toanz28
Posts: 2
Joined: Sat Sep 28, 2013 4:30 pm

AFR leaning out

Post by toanz28 »

Hi
Recently I've encountered my AFR leaning out ( above 17:1 ). During those times, the car hesitates pretty bad, seems like
a misfire. This issue is intermittent, doesn't occur all the time. But I have been able to datalog some files as to when its
happening. Just wondering if i can get some tips as to where to look. either Ignition side or Fuel side.


Built H22 Turbo
p28 w/ s300
Stock ignition
RC750 cc injectors ( I think this may be the culprit )

Heres the calibration and some datalogs
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: AFR leaning out

Post by Spunkster »

What whideband are you using and why not run closed loop off the wideband signal?
toanz28
Posts: 2
Joined: Sat Sep 28, 2013 4:30 pm

Re: AFR leaning out

Post by toanz28 »

Hi

I'm using PLX DM-6.

I have it installed as per the instructions. As for the settings in the parameters, That is how the tuner left it.

Any advice?
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: AFR leaning out

Post by Spunkster »

Try changing it to run closed loop off the wideband signal instead.
Post Reply