B16A2 1972cc Turbo Basemap Request...

[CavemanXXL]

Hey fellas,

Here is my setup:

- B16A2 Block
- 84mm 9.0:1cr CP Pistons
- 89mm B18 Crank
- ITR Oil&Water Pumps
- Skunk2 Tuner 1 Cams
- Skunk2 Valve Springs & Titanium Retainer Kit
- Supertech Valve Guides
- Ferrea OEM Size Valves
- Edelbrock Victor X Intake Manifold
- Skunk2 68mm TB
- Godspeed Intercooler
- Precision 780cc Injectors(Low Impedance with Resistor Box)
- Aeromotive 340LPH Fuel Pump
- Aem 3.5Bar Map Sensor
- 16PSi of boost(16psi peak, 14.8-15psi cont.)(running from wg only)
- BRMS Ramhorn Manifold (Have both PS & AC...)
- Tial 38mm WG
- M&W Ignition Module
- Crane Ignition Coil
- NGK Spark Wires(8mm)
- NGK BKR8EIX Sparks
- Methanol Kit
- P06 ECU with Vtec components(don't ask why...)
- And S300v2 of course...

Need a very basic basemap(no need to include methanol)...

Thanks in advance...