"Stock Equivalent MY06" map, 15:1 @WOT @VTEC

[deibit]

Hi,

I installed the European Flashpro on a MY08 EDM S2000. I flashed the only available map for Europe: "Stock Equivalent MY06"

I did 3 launches from 3 gear to 8000rpm and in each one of them the A/F peaks to 15:1 just at the VTEC entry point (at WOT)

Is that the expected result? does not sound very much "Stock Equivalent" to me... :)

Fortunately the map has been adapted, but sounds like too dangerous for a default map isn't it? (some people might think that "Stock" means "Safe")

Adding some warnings would be advisable.. or (even better) would be to define by default a fuel cut @VTEC for the "stock" map...

[Hondata]

We use exactly the same fuel tables as stock.

[deibit]

Is it so? exactaly the same like a Stock MY06+ European F20c with DBW?

Unfortunately I can't compare this behaviour with a Stock ECU, since I never used a Stock ECU with my bolt ons (Intake + ASM07 Header + Test Pipe + Tanabe Concept G exhaust), before I was using a eManage and it was (obviously) tuned :)

I'm attaching one of the logs. I was using the stock equivalent with deactivated secondary O2 (no more changes)

Does it look "normal"?

Thanks!!

[Hondata]

It is running lean from the header. You need to add fuel on the high cam.