To HONDATA. 8 injectors

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Progress
Posts: 89
Joined: Thu Jul 07, 2011 1:05 am
Location: NYC tuning avalable 3479895028

To HONDATA. 8 injectors

Post by Progress »

Hello. Is there any way i can wire 8 injectors to run s300. Thanks.
tuning upon request
347-989-5028
9.23@167 B18C street/track tuned
HP unknown
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: To HONDATA. 8 injectors

Post by Spunkster »

Not without damaging the ECU. The ECU is designed to only run 4 injectors.
Progress
Posts: 89
Joined: Thu Jul 07, 2011 1:05 am
Location: NYC tuning avalable 3479895028

Re: To HONDATA. 8 injectors

Post by Progress »

What if you change resistors. So 2 injectors get triggered at 1 time
tuning upon request
347-989-5028
9.23@167 B18C street/track tuned
HP unknown
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: To HONDATA. 8 injectors

Post by Spunkster »

I would not recommend this.
Progress
Posts: 89
Joined: Thu Jul 07, 2011 1:05 am
Location: NYC tuning avalable 3479895028

Re: To HONDATA. 8 injectors

Post by Progress »

Ok. Any suggestions.
tuning upon request
347-989-5028
9.23@167 B18C street/track tuned
HP unknown
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: To HONDATA. 8 injectors

Post by Spunkster »

What size injectors are you using?
Progress
Posts: 89
Joined: Thu Jul 07, 2011 1:05 am
Location: NYC tuning avalable 3479895028

Re: To HONDATA. 8 injectors

Post by Progress »

2000cc
tuning upon request
347-989-5028
9.23@167 B18C street/track tuned
HP unknown
User avatar
Hondata
Site Admin
Posts: 10616
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: To HONDATA. 8 injectors

Post by Hondata »

You can run 8 high impedance injectors for short periods without a problem. At idle the duty cycle is low enough that they will be ok, and as long as the maximum load is limited in time (eg a drag race) the injector driver will not overheat. But then, if you're using 8 x 1000cc+ injectors, you're not going to maintain full throttle for long periods.
Hondata
Post Reply