full throttle shift help!!!!

[vteckiller]

hello

I would like to connect my switch but I have a problem ..

Connector I have the E22 ecu ok

but I'm going to switch the +12 V or ground???? thank you

my car civic type r ep3 europeenne

hondata kpro

[Spunkster]

Brake switch input should be powered, but check with a multimeter to be sure before connecting it to the ECU.

[vteckiller]

thank you

+12 V switch on and switch to the ecu E22

sorry

why I measured with a multimeter??

[Spunkster]

To make sure you are not giving power to a ground input or ground to a powered input. This will help you prevent damaging the ECU or blowing fuses.

[vteckiller]

oki

thank you

[vteckiller]

hello if I use my E16 ecu pin.

switch must be connected to ground???

thank you

[vteckiller]

what is the best solution E16 or E22???

[05typeR]

E29 seems to be the simplest in my opinion and the connection is right by the driver's clutch pedal, kinda.

Just needs a ground.

[vteckiller]

thank you to you for your help..

my car is european driver is left.

205 connector is on the left of the clutch pedal??

thank you

[05typeR]

My car is also a EDM but it's right hand drive, LHD is similar with same connections, it will be by the driver's accel pedal.

[vteckiller]

thank you for your tips