FlashPro Manager 1370 crash

[alollini]

- serial number of your FlashPro : FP-CRZ-INT-80049
- FlashPro Manager version (not 'the latest') 1.3.7.0
- the calibration (as an attachment) => provided EU-CRZ stock equivalent not modified
- a datalog of a problem (as an attachment) =>
- what sort of vehicle you have => European CR-Z
- what sort of ECU you are using => stock ECU
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).

=> engine related bolt on list :
HKS RSR intake (red 2 layer wet filter element)
Spoon Throttle Body
T1R exhaust
Spoon muffler
GE8 intake manifold plenum
motul 0w20 300v racing oil / mugen oil filter element

- a specific description of the problem

I did my first datalog in order to start calibrate the AFM sensor, from graph view, i decided to increase AFM flow numbers by 6%

i clicked on mass flow (g/s) row header button in order to select all row
i go to Edit menu, select Adjust
boom! - Abnormal program termination


computer is : Toshiba Satellite C660D-1C6
windows 7 Home Prem.

edit : i am not a windows guy, this PC has nothing else installed than Flash Pro managed and needed stuff.

[alollini]

the Edit menu commands are making the crash,

however by right clicking on the selected items to adjust values works !

[Spunkster]

Start by downloading the most recent Beta version of software and see if that resolves the problem.

[alollini]

Thanks I will try that.

[Hondata]

Thanks for the report - the problem is still there in 1.4.2; I will fix very shortly.