need K-Pro Kmanger ver 1.3.9

K-Series Programmable ECU installation questions / support issues
Post Reply
anwar505
Posts: 10
Joined: Tue Nov 06, 2012 5:23 am

need K-Pro Kmanger ver 1.3.9

Post by anwar505 »

hi guys :)

im trying to connect my hondata to my laptop using latest ver of KManager but its seems the calibration on the ECU by ver 1.3.9
so im able to read the sonsors only but icant download the current map in ECU to my laptop becouse of this error
error msg " the calibration in the ECU (1.3.9.0 ) is from an older verion of KManger . please upgrade the ECU calibration before datalogginig from this ECU "

so i think i need need K-Pro Kmanger ver 1.3.9 to able to download my map first
then to load it again for update

Note : i dont have .kal file saved in my laptop becouse if i have it i can solve this issue
so from where i can download this ver 1.3.9 :(
and sorry for my bad english :)
Last edited by anwar505 on Tue Nov 06, 2012 5:41 am, edited 2 times in total.
anwar505
Posts: 10
Joined: Tue Nov 06, 2012 5:23 am

Re: need K-Pro Kmanger ver 1.3.9

Post by anwar505 »

Image
User avatar
Hondata
Site Admin
Posts: 10615
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: need K-Pro Kmanger ver 1.3.9

Post by Hondata »

You should not backdate the software.

What happens when you download the calibration with 3.2.0?
Hondata
anwar505
Posts: 10
Joined: Tue Nov 06, 2012 5:23 am

Re: need K-Pro Kmanger ver 1.3.9

Post by anwar505 »

as you see the pic
error msg " the calibration in the ECU (1.3.9.0 ) is from an older verion of KManger . please upgrade the ECU calibration before datalogginig from this ECU "

and after that im not able to download or save my map :(
and i dont have a map copy saved on my desktop :( becouse my car was belong other persone and icnt reach him to get the file
memo_ksa
Posts: 5
Joined: Wed Oct 17, 2012 2:32 am

Re: need K-Pro Kmanger ver 1.3.9

Post by memo_ksa »

i think if you use any V under 1.3.9.0 or up V like 3.2
you can not save your calibration from ECU you must use 1.3.9.0
User avatar
Hondata
Site Admin
Posts: 10615
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: need K-Pro Kmanger ver 1.3.9

Post by Hondata »

What happens when you try to download using 3.2.0?
Hondata
anwar505
Posts: 10
Joined: Tue Nov 06, 2012 5:23 am

Re: need K-Pro Kmanger ver 1.3.9

Post by anwar505 »

just i select "online"--> tools --> download

first i got error msg " the calibration in the ECU (1.3.9.0 ) is from an older verion of KManger . please upgrade the ECU calibration before datalogginig from this ECU "

and then tryng to read ECU and after that hange the software and close ,,and i try this also with another laptop

so plz from where i get ver .1.3.9 i need it badly to save my map only and after that i will upgrade it
email: anwar505@hotmail.com
emails:anwar.aldahmasi@gmail.com
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: need K-Pro Kmanger ver 1.3.9

Post by Spunkster »

Make sure you are not datalogging when you try to download and it should work without any problems.
anwar505
Posts: 10
Joined: Tue Nov 06, 2012 5:23 am

Re: need K-Pro Kmanger ver 1.3.9

Post by anwar505 »

thanx man , you are right
problem solved

Image
Post Reply