wideband connected now rich/lean

[civicturbolee]

Hi I have been using hondata in open loop for a while and decided to connect my innovate wideband to my ecu, I have connected it to my eld pin and changed all the settings so the wideband reading is the same as smanager as it is on my wideband gauge, but now I have a problem when at steady throttle its going lean-rich-lean-rich constantly from like 13afr then jumping to 16 afr, idle is still fine at 15:1 and on boost its fine but just part throttle? Does anyone know what the problem could be? Thanks lee

[Spunkster]

http://www.hondata.com/forum/viewtopic.php?f=19&t=3772

[civicturbolee]

i am running a standard b18c4 with gt30 evo 560cc injectors p28 with s300

lean rich.skl

lean and rich.s3d

[Spunkster]

Looks pretty normal, but you may be able to clean it up a little by changing the rate of change for the closed loop settings.

[civicturbolee]

okay thanks, it just seems at steady throttle the car is slowing and then picking up again as it goes lean then rich, i will try changing that then. Do i just increase the numbers in rate of change- slow fast- rich to lean fast lean to rich

[Spunkster]

Try different settings and see what works best in your situation.