FlashProManager V1.3.3

[Hondata]

Delete the update.exe file and try again.

[nunoctr]

thanks hondata for the new beta 1.3.3, for the first time I saw today my spoon sports cams going full 50º with the afm (map fuel) calibration

[civicRSA]

Great additional features.
Thank you.

[Civic Si] Added boost cut, fuel overrun cut delay, second ECT sensor, VTC cam angle index.
Any chance these can be added to the Euro CTR?

[Civic CTR - Euro] Increased maximum cam angle to 50 degrees, added warm up retard table.
Don't seem to find this table

[nunoctr]

I can't find that table also!

the fuel overrun cut delay it's on the Fn2 calibrations for some time.

[Hondata]

Next release then.

[all-black]

i dont think the auto gear putting in the teeth makes the correcting to speed. you still have to change add or remove percent to have an accurate speed

[Hondata]

For the dash you will still have to correct the speed. However, the ECU speed should be closer.

[MJz]

[Civic Si / Type R] Added VTC deceleration angle control.

I also cannot find VTC deceleration table on Civic-Si-RRC 2-Reflash calibrations...

[Spunkster]

Go to Options and make sure you have Show Advanced Parameters checked.

[MJz]

Go to Options and make sure you have Show Advanced Parameters checked.

I'm already set to Advanced Parameters.

[Spunkster]

Once you check the box you will be able to check the other box. I have verified this is working.

[MJz]

Once you check the box you will be able to check the other box. I have verified this is working.

But in Civic-Si-RRC 2-Reflash calibrations（FD2 Hondata Type R Reflash） not working...

[Spunkster]

I'm sorry, but that calibration doe snot have the code. YOu will have to use a different calibration if you want that option. It is a preset reflash that does not have the same options as the rest.

[MJz]

I'm sorry, but that calibration doe snot have the code. YOu will have to use a different calibration if you want that option. It is a preset reflash that does not have the same options as the rest.

I can use other calibration upload to ABA-FD2 Type R ECU？