FlashProManager V1.3.3

[Hondata]

2009-2010 TSX Support

Quickspool
Holds the wastegate shut until just below the target boost to spool the turbo quicker.

V1.3.0 Changes

• FlashPro firmware updated to version 45
• Added support for the 2009-2010 TSX.
• Added long term fuel trim min/max to closed loop parameters.
• Changed Check For Updates to show current version number and release dates for both beta and production releases.
• Added quick spool to boost control.

V1.3.1 Changes

• Fixed Conversion exception when checking for updates with non-English language settings

V1.3.2 Changes

• [S2000] Added minimum ignition timing tables.

V1.3.3 Changes

• [Civic Si / CTR] Added VTC deceleration angle control.
  [Civic Si / CTR] Added gear ratio correction for ECU gear detection as well as cruise control.
• [Civic Si] Added boost cut, fuel overrun cut delay, second ECT sensor, VTC cam angle index.
• [Civic CTR - Euro] Increased maximum cam angle to 50 degrees, added warm up retard table.
• [S2000] Changed P2A00 error threshold.

[mabo]

Very RAW release.

First, i still see 1.3.0 on top after i installed 1.3.1,


it constantly shows error




It still show 1.3.0 in check for updates and after i press download 1.3.1 it throws error - update.exe isnt win application.

[IcEMoCHa]

Unable to open any calibrations using this version.

[VaporBomb]

I am getting the same error. I also cannot open any cals. This was my first install, and I have uninstalled it. Should I try to reinstall v1.3.1, or is it ok to just download v1.2.8?

Thanks for any help.

[Spunkster]

It has been fixed. Try it now.

[VaporBomb]

It has been fixed. Try it now.

Seems fine now.

Thanks

[mabo]

Works fine , thanks guys. Please dont pull out old one before you see new one is working )

[beaugus]

In regards to the recent addition of "Added long term fuel trim min/max to closed loop parameters" - does this adjustment allow us to virtually "disable" long and short term fuel trimming on MAF/MAP hybrid calibrations by making the values "0" and if so are there any significant concerns by doing this?

My FN2 is running a hybrid MAF/MAP tune at the moment and the fuel tuning is virtually flawless but the short and long term fuel trimming is affecting my tune the longer I drive and have been waiting for the option to disable fuel trimming and hoping this new option finally allows me to do this.

Just wanted to be 100% sure before I commit to making changes to my tune that I'm correct in saying that changing the values to 0 will esentially disable short/long fuel trim whilst in closed loop.

[mabo]

.

[mabo]

i had 1.3.1 on second PC , selected check for updates option , pressed download 1.3.2 ang got this





Not shure latest build have this error but i cant check it )

[Hondata]

Anti virus software is removing the update.

[mabo]

Sorry but its not an a-virus tricks. Its system error, before i posted i tried it on clean VM and disabled antivirus on regular system and got same error.

[Hondata]

Then use explorer to check the update.exe file in your User directory, and see if the file runs directly.

[Spunkster]

Try downloading the update directly from the downloads section of our website.

[mabo]

Then use explorer to check the update.exe file in your User directory, and see if the file runs directly.

I tried , this file is zero length ( 0 bytes ) and i cant open it, same error. I disabled a-virus and reinstalled manager , same result.