s300/ecu problems.

[jdm inc]

i am having a problem with my ecu with s300 v1 in a 93 honda civic

I cut r2 and r3 for analog input 2 to be used. for a fuel pressure sensor.
and also cut. r136 and r 138 for my wideband
Now when i go to start the car. its getting cel code 9 cyc 1 sensor.

i tried a buddy of mines s300 and bam no check engine light.

what could be the problem?

[jdm inc]

????

[Spunkster]

What ECU is this in and can you post pictures of exactly what you have cut?

[jdm inc]

P28 Ecu yes I can take a pic and post as soon as I get home

[jdm inc]

[Spunkster]

Have you tried your ECU in the other vehicle?

[jdm inc]

yes tried it in a 93 civic coupe. and still the same thing.
all stock!

[jdm inc]

any ideas?

[Spunkster]

Have you tried the other ECU with your s300?

[jdm inc]

no i have not, but i put in another s300 and the check engine light went away

[jdm inc]

cutting those resistors out shouldnt have messed up the ecu though right?
and i am afraid to cut them out if i get a new ecu cause i dont want the exact thing to happen.

[Spunkster]

Those resistors will have nothing to do with that error. Try your s300 in a different ECU.

[jdm inc]

can i cut the resitors also correct?