HELP!!

K-Series Programmable ECU installation questions / support issues
Post Reply
bxplatano3000
Posts: 3
Joined: Fri May 04, 2012 1:09 pm

HELP!!

Post by bxplatano3000 »

Was up guys, I have in issue, I've been trying to figur out for about a month now. Everytime I pump gas into my car(93) when I go turn un the car it's start sound like its not getting enough gas, so what I have to do is keep pumping the gas peddle while I'm turning the ignition for it to turn on. Then I have to keep it around 2k rpm for a couple of min for it to stay on. It only happens after I pump gas. Help...
bxplatano3000
Posts: 3
Joined: Fri May 04, 2012 1:09 pm

Re: HELP!!

Post by bxplatano3000 »

By the way I have a k24a4 swap in it.
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: HELP!!

Post by Spunkster »

Has this been properly tuned on the dyno?
bxplatano3000
Posts: 3
Joined: Fri May 04, 2012 1:09 pm

Re: HELP!!

Post by bxplatano3000 »

Negative, all I have is just the basic map that comes with the kpro. I'll ive done to the motor is v2 intake and itr flywheel. What's your suggestion?
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: HELP!!

Post by Spunkster »

Get it properly tuned and the problem should go away.
Post Reply