H22A7 Accord Type-R help request please

h22a7-crx · Post by **h22a7-crx** » Mon Oct 04, 2010 12:49 pm

[quote="h22a7-crx"]hello agent 47
HELP needed ASASP :(

h22a7-crx · Post by **h22a7-crx** » Thu Oct 07, 2010 8:40 am

help :_(

Agent47 · Post by **Agent47** » Tue Jan 25, 2011 7:01 am

Haven't seen you cry for assitance.

Do you still need help?

h22a7-crx · Post by **h22a7-crx** » Sun Apr 03, 2011 1:06 am

ya :) may u help me plz .
i fixed all the problms ( distributor , timming ,...) and load the map the car pulls hard ,but the clutch died :) anyway
my setup same as ur's
- stock h22a7 , s300 hondata , 76 mm throtttle body ,lc1 wideband =d10 eld
i load (far2wired ) basemap but cams are dialled -2.5 and +2 ,

plz may u send me ur revised map ,( i don't know how to fix this -cams are dialled -2.5 and +2.) my engine is stock.
display shows IGN =-4
i need it
thank u inadvance

h22a7-crx · Post by **h22a7-crx** » Mon Apr 04, 2011 9:36 am

help :)

h22a7-crx · Post by **h22a7-crx** » Wed Apr 06, 2011 11:03 am

Luke · Post by **Luke** » Wed Apr 06, 2011 9:41 pm

why don't you take your car to a tuner and get it tuned?

so you don't have to look for basemaps (which aren't available anyways) and your car will run just fine.

we had here a F20B, so some kind of engine, where you can't find anything.
after some reading we knew, that this engine has the same head as the ATR and revs higher, due to the lower stroke.
after tuning the car runs just fine :)

best regards Lukas

h22a7-crx · Post by **h22a7-crx** » Thu Apr 07, 2011 6:40 am

:lol:
dear luke
first i want u to know no tuner in my country :) one dyno and it's far AND not good also plus honda v tec engines r not wElcome here people used to own
BMW , SUBARO ..... BUT honda is for ladies , u get my point
also i'm the only one have this s300 hondata plus this h22a7 engine :)
working on it 3 years ago till know to solve the distributor issue ( obd1 distributor :)
OK
SO IF U TEACH ME HOW TO FIX THE IGNITON MAP THIS WILL BE V GOOD ASK ME FOR A DATALOG if u want to help me
thank u inadvance

Luke · Post by **Luke** » Thu Apr 07, 2011 7:50 am

eastern europe it was, where you come from, right?

in poland there is ecu performance. they do a great job.

as far as i know my friend managed to put in the OBD1 electronics in the OBD2 distributor. there was some building done.

my opinion: with an OBD1 distributor it just should work fine.

i'll look for your threads here and look if i can help you somehow.

best regards Lukas

h22a7-crx · Post by **h22a7-crx** » Thu Apr 07, 2011 8:12 am

no i'm not from eastern europ, i"m from lebanon:)
i did solve all the wiring problms ( obd2b to obd1 conversion harness , obd1 distributor, 2 wires iacv ,s300hondata ,...)
thank u sir for trying to help me
waitting u

Luke · Post by **Luke** » Thu Apr 07, 2011 8:25 am

a ok...
somehow i had a guy on my mind from estonia, i think...

anyways... i'll take a look, and see what we can do.

best regards Lukas

h22a7-crx · Post by **h22a7-crx** » Mon Apr 11, 2011 10:58 am

thank u :)
i did a few min datalog ( i was afraid to break my engine )
innovate lc1 to d10

jack sargent · Post by **jack sargent** » Fri Apr 13, 2012 7:25 am

hello, pretty new to using hondata software and could really do with a good base map for my h22a7 ej2, its got all the nessasary obd1 conversion items, iacv, distributor, custom exhaust manifold and exhaust. just after a good base calibration to get the vehicle on the road.

many thanks
jack

jack sargent · Post by **jack sargent** » Sun Apr 29, 2012 2:30 pm

can anyone help with this please.. thanks jack

Hondata

H22A7 Accord Type-R help request please

Re: H22A7 Accord Type-R help request please

Re: H22A7 Accord Type-R help request please