Thought I would share my tune.
90 civic si
d16z6 76mm bore
Ported blower
70mm TB
3.4 pulley
Y8 pulley
dsm 450s
185 t stat
AFR 10.9-11.2
I have pulley 1 degree of timing and altered the ignition iat adjustments.
The car dynoed 170/131 befor the Y8 pulley install on 5 pounds. I have focused on keeping the IAT's down as much as possible since I do not have a meth kit on it yet. Next step is the tstat drop to a 160 degree. I have a CAI which dropped the iats 10 degrees and removed my bumper light and helped another 5 degree.
d16z6 with JRSC
-
Monnoracing
- Posts: 110
- Joined: Sun Aug 28, 2011 11:41 pm
d16z6 with JRSC
You do not have the required permissions to view the files attached to this post.
-
Monnoracing
- Posts: 110
- Joined: Sun Aug 28, 2011 11:41 pm
Re: d16z6 with JRSC
I have since smoothed out the afr in the beginning of this 3rd gear pull.
You do not have the required permissions to view the files attached to this post.