Lean Start cold engine

[yangeghatch]

Hi guys,

I got a D16z6 with vitara internals w/ Greddy TD04 kit
I started a new calibration and started engine
Engine starts but it is leaning out.
I think it is because the engine is cold.
Is there something on the parameter that I need to adjust?
Also if you can provide me a link that would be very helpful.

Thanks.

[hpmx18]

check the fuel compensation tab for water temp & air temp

[yangeghatch]

check the fuel compensation tab for water temp & air temp

I didn't play with them. Hints on this? Thanks.

[hpmx18]

check the fuel compensation tab for water temp & air temp

I didn't play with them. Hints on this? Thanks.

let the car cool down to where its cold enough to duplicate the same symptoms and see wat table needs a bigger % on the same tab i was referring to

[hondatechpr]

First check if the coolant sensor is connected and working.

[yangeghatch]

Still haven't had a chance to try it out yet...

Do you guys usually leave this area stock when tuning or did you guys add more fuel?

How much do you usually add? ( I know it varies between setup just want an idea)

Thanks.