97 ek coupe
-k20z3 86.5mm 11.7:1 wisecos slight mill/deck
-hr cai/dc swap header/3" exh
-stock head
-kpro v2 prb
can anyone take a look at my datalog. trying to make the track tomorrow if all is well.
thanks in advance
UPDATED: ADDED A NICE DATALOG WITH SOME PULLS. CAR SPUTTERS ANYTHING OTHER THAN WOT and acts like its starving for fuel or air, not sure, doubt its air though....
check my datalog
-
MarkyMark203
- Posts: 38
- Joined: Fri Feb 24, 2012 4:27 pm
- Location: twoohtree
check my datalog
You do not have the required permissions to view the files attached to this post.
Last edited by MarkyMark203 on Tue Mar 13, 2012 9:42 am, edited 1 time in total.
-
MarkyMark203
- Posts: 38
- Joined: Fri Feb 24, 2012 4:27 pm
- Location: twoohtree
Re: check my datalog
bumpp! Disregard the "overheat".kdl, I figured that out, it had a air pocket and just needed to be bled.
Re: check my datalog
I appreciate the kind words in the email you sent me. I would rather not be pursued in that way and would rather you stick to the forums for questions and answers.
as far as the logs they are untuned base maps. the car is pig rich and there needs to be a lot of time in the cam degree areas. K series take time to tune correctly. i have seen other posts from you. is this your car or are you trying to tune a clients car? Recommend being very careful with this set up or take it to a reputable K series tuner.
as far as the logs they are untuned base maps. the car is pig rich and there needs to be a lot of time in the cam degree areas. K series take time to tune correctly. i have seen other posts from you. is this your car or are you trying to tune a clients car? Recommend being very careful with this set up or take it to a reputable K series tuner.
EFI-101 & Advanced Certified*