need tune for stock d16z6 turbo @7psi.

[erico]

i need a tune for my stock d16z6. i have it boosted at 7psi. it idles good and all but when i attempt to push it hard it has a hard time go past 5k rpm. i get my ass whooped all the time by other n/a hondas. i am nowhere near a dyno place so if anyone has a good calibration culd use i would really appreciate it.


stock d16z6
dsm 450 cc injectors
tial 38mm wastegate
.50 .63 a/r turbo t3/t4

[yangeghatch]

At 7 psi you would have a hard time smoking B-series swap depending how fast your turbo spools up. I know because I've been there. I'm at 10psi and smoked a few Rsx type S NA.

[erico]

It spools up at 3-3500 rpm's.. It pulls nice but cuts off at 5k rpm's. It my first time boosting but I was told a tune would do the trick.

[tb144050]

It spools up at 3-3500 rpm's.. It pulls nice but cuts off at 5k rpm's. It my first time boosting but I was told a tune would do the trick.

Save your money and keep your foot off the gas until you take it and get it tuned by a pro. I put in the s300 about 2 months ago, and (even tho I am not turbo) mine does the same. I've made a pretty good basemap for daily driving, but it loses power at high rpms...

Long story short: I now have to rebuild my motor bc it is screwed from trying to "streettune" it myself. Save that $400 and take it to a pro, and you are much better off....much better than spending over $400 to fix whatever breaks first and STILL NOT have a good tune. :(

Just some free advice that will save you money. I was also warned but I didn't listen. They are called BASE-maps for a reason: just to daily-drive it to the nearest pro-tuner. Please consider it?

--TJ

[erico]

Yea you make a good point there man.. Ill just save up and go to a dyno. If I find one close to me lol thanks for taking the time to reply I appreciate your advice brother.