When posting a KPro problem with your vehicle, please include:
- serial number of your K-Pro
- ECU part number (starts with 37820)
- KManager version (not 'the latest')
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
- a specific description of the problem
Most of the recent posts leave out information pertinent to solving the problem.
If you have an engine swap, please mention this. There are known problems with some of the engine harness used in engine swaps.
Serial # 05009760
ECU : PRB A05
Version : 1.5.1.0
Calibration : N/A
Datalogging: N/A
Vehicle : 00 Civic SiR EM1
K20a2, Chasebays CM1 harness, K Tuned TPS.
I have uploaded the RSX type S basemap and I can not start the car. The motor cranks but wont start. I tried to set my K Tuned TPS but both "read" buttons are greyed out. I have a green light and a flashing red.
edit**
got it to start. nvm.
Please help, I really need to get my car running.