Was this PRB KPro for an 05-06 RSX or an 02-04?

[doadus51]

Greetings All,

Purchased a used KPro off ClubRSX, and the person stated it was used in their 02-04 Type S and worked fine. After installing in my 02 TypeS, I'm getting a P0011 VTC CEL. After extensive searching, I've found this pops up if a converted PRB for the 05-06 is used in an 02-04. The stock ECU does not throw this CEL, only when using the KPro.

Is there anyway to tell what car this was programmed for?

It is hardware version 2.16, serial number is 07597. Firmware is 2.02.

Thanks for any help and or support on this.
-Chris

[Spunkster]

Email a high quality in focus picture of the inside of hte ECU and K-Pro board to support <at> hondata.com.

[doadus51]

Thanks for your help. :)